Letter Re: Tinder and Fire Ignition Options
SurvivalBlog reader "Entropy" recently wrote a great article about building a fire in a post
collapse world and being a Scoutmaster for 18 years it is a lot of fun teaching scouts how to make one. Seeing the look
in their eyes as they get their first fire built in the outdoors using no matches is a great experience. As a matter
of fact, in winter camps where the ground is not frozen I like to use a trench fire pit with rocks in it, then bury it and
sleep on top for a very cozy and warm night. I too was bitten by the survival bug when I was a young scout, and the first
priority in survival is ‘keeping your wits about you” so you can focus on what is important. One real force
multiplier in helping to keep people calm is a fire. It can warm the heart as well as the body. Here are a few
simple ways anyone can use to get a nice little fire started. Please remember that little is the key word in a survival
or bug out situation. Cowboys used to light a very small fire just big enough o put their coffee pot on, because they
ate their food cold, and a hot drink was all they needed to warm their spirits. The methods below are simple and inexpensive
methods of getting the first spark into a flame.
Match: enough said, unless it is windy in which case you may only have a 0.5 second
flame. Lets read on, shall we?
Lighter: ditto…but wait
what if your lighter is out of fuel? Well if it still has a good flint, then you have a handy little spark generator.
I prefer the older Zippo style lighters since I don’t have to worry about a seal drying out and I can store some lighter
fluid for many refills. It also lets me have a refill of flints right in the bottom of the lighter.
Permanent Matches: These are an interesting combination between a Lighter, and a “Fire
Stick” (below). It comes with a small reservoir which you fill with lighter fluid. The ‘cap’
has a magnesium striker it with a glass wick that is supposed to burn up to 15,000 times. The wick is in the screw top lid
which extends down into the lighter fluid. You strike the magnesium stick on the side of the container to ignite.
Fire Piston: The fire piston uses the friction from compressing air to get
an ember from tinder.
Flint and Steel: If you can find some flint,
and you have a piece of high carbon steel then all you do is strike the two together and you get a spark. These are
usually used with char-cloth (cloth which has been charred) to catch the spark, but you could use a number of items to catch
Magnesium fire starters: These are a gray rectangular piece
of magnesium with a bar on one side that when you slide a piece of high carbon steel down, it will spark. These are
very handy to keep around. Just scrape off some magnesium into a small pile, and then place the ‘sparking bar’
right on it and when you scrape the bar, it will ignite the magnesium for a hotter ignition source.
“Fire Sticks”: Everyone has seen these they are simply the piece of steel with the
post you run it down to get a spark. These are similar to Flint and steel. There are many out there which range
from a very inexpensive stick and steel on a small chain, to the more survival sized ones. I have used one called a
“Blastmatch” in the past which is a spring loaded plunger type of stick with the steel scraping it as you press
down on it. It gave a brilliant spark (almost too much for OPSEC) but then it broke very easily. So really ‘tool
time’ these when you are shopping.
Magnifying glass: Everyone
remembers burning insects with a magnifying glass, and yes you can get things to smolder, but you really need a good amount
of sun to get a magnifying glass to start a fire. To do it you need to focus the brightest part of the light coming
through the glass into the smallest most compact point you can make it, and then hold it there. It will work on paper,
and really dry small vegetation, but you do have to be patient.
9 volt battery
and steel wool: Just rub the steel wool across the top of the battery and the electrical shorting sparks will
ignite the oil on the steel wool. DO NOT STORE THE TWO TOGETHER…it gets hot fast.
A little goes a long way with this.
Potassium Permanganate (a powder) and Glycerin
(a viscous fluid): Potassium Permanganate is an Oxidant which can be used to sterilize water, treat ulcers
like canker sores, and a general topical disinfectant, but it will stain the affected area purple. It is used to treat candidiasis
(superficial fungal infections like Oral Thrush and Vaginitis) and will neutralize Strychnine (poison). Glycerin, or
Glycerol, may be used as a laxative (2-10 ml used as a suppository or enema), and has been used to treat psoriasis, burns,
calluses, and other minor skin irritations. It works as a bacterial desiccant (it removes moisture through absorption)
on contact so it can also help with periodontal diseases. Okay back to the point, when you create a small mound of Potassium
Permanganate with a small depression in the top, and then place a few drops of Glycerin in the depression you get a very impressive
exothermic reaction which will start a fire, or even can be used to initiate a thermite reaction. It takes a bit of
time for it to occur but don’t put your hands over it to feel for heat. It happens very quickly and is very hot when it happens. I recommend testing this method, but don’t do
it on your kitchen table with a thick folded up piece of heavy duty tinfoil. It will go through it and make your wife
very unhappy with the black mark it leaves. Trust me on this point.
Hand Drill: You will need a straight stick with a narrowed end (Drill), a notched
piece of wood with a depression for holding the narrowed end of the stick (the notch should extend into the bottom of the
depression for air movement). You will also need a piece of Leather, or metal under the notch to catch the ember. The notched
board goes on the ground and you hold it in place by putting your foot on it or kneeling on it. . The drill should
be standing straight up out of the depression, and held in place by your two palms. By spinning the drill between your
palms, and pressing down you will create friction and over time a smoking ember. You will continually have to move your
hands back up to the top of the drill as they will move down as you continue to spin and push down on the drill. When
you see some smoke coming from the depression then you can remove it to see if you have an ember. When you have an ember
you will need to move it quickly to your tinder and begin the process of nurturing it into a flame.
Bow and Drill: This one is probably the most complicated in that you must have: a straight piece
of wood about 8-12 inches long which is narrowed on both ends (drill), a notched piece of wood with a depression for holding
the narrowed end of the drill (the notch should extend into the bottom of the depression for air movement), a flexible but
strong piece of wood about 16 to 24 inches long that has a slight natural curve to it (the bow) , a string (bow string) and
a piece of something hard enough to withstand the heat from the drills friction with a depression to help control the top
of the spinning drill. You will also need a piece of Leather, or metal under the notch to catch the ember. The
notched board goes on the ground and you hold it in place by putting your foot on it or kneeling on it. Then you have
the drill standing straight up out of the notch. The bow string goes around the drill (one wrap only) and then on the
top of the drill is held by the hard small piece of wood and your hand (gloves are a good idea). The bow string should
be tight enough that when you push the bow back and forth it will spin the drill but not bind on it. Once you have this
balancing act in place, you move the bow back and forth until you see an appreciable amount of smoke coming from the notch
then you look under it and see if you have an ember. If you do then transfer it to your tinder immediately and start
the gentle blowing that will bring you a flame. If you don’t have any In-Laws that frustrate you, then this will
help you understand what frustration is all about. If you can do this, you can do anything. This is a really primitive
‘ART FORM’ method of making fire.
Getting that first spark to actually ignite your tinder is a little harder
that it appears on the silver screen. I have had many scouts go grab a handful of what they think is dry bark, or weeds
only to find that it is still too wet, or the oils in them only smoke no matter what they do. One of my favorite examples
was an episode of a survival-BASED reality television show where they gave
the contestants a magnesium fire bar. They were holding the magnesium side, and striking the flint side with a machete.
They were getting a pretty good spark too, but there was NO WAY they were getting a fire. My wife, whom I love dearly,
was sitting there saying “Oh that was a good one”, for every spark they got. I on the other hand was sitting
there thinking, “They would die in a real survival situation”. It wasn’t until I explained to her
that you can scrape magnesium into a little pile, hold the fire starter right down on the pile, and scraping the blade (held at a slightly obtuse angle towards the pile ) down the ‘flint’
side so that the sparks land in the magnesium and "poof!" you have fire.
Ethanol based hand cleansers: these come in pocket bottles or pumps and the 10%
ethanol will burn for a short time. A spark can ignite this but the ethanol will evaporate quickly.
Cotton balls and Vaseline: These will burn once ignited just like a candle will. If you
spread out the cotton so it is not just a clump, you can light it with a good spark.
Paraffin and Cotton balls: Very similar to above, just different substance.
Sawdust and paraffin blocks: Fill the depressions in a paper based egg carton with a mixture
of melted paraffin mixed with sawdust (from wood not particle board due to the glue). Let them cool, and cut or break
apart the individual parts, with the cardboard attached and it can be lit with a lighter, or match and will burn like a candle.
Dryer Lint: This is my personal favorite. Simply take the lint
residue from drying cotton clothing out of your dryer and place it
into a pill bottle, Ziploc baggie or other water resistant container and it can be started with the smallest spark.
This will also win you points with the significant other by cleaning out the lint filter. With it being so flammable
you may want to confirm that your dryer vent is clean and connected. This is especially important if you have a furnace
or water heater (flame) in the same room. Safety first.
Wax and newspaper: Dip pieces of newspaper in paraffin wax and it burns like a candle. This one
is similar to the sawdust but you can leave some of the paper not covered in paraffin and it will ignite easier. You
can do this with cardboard or any other paper product as well. The paraffin only makes it a little slower burning and
a little more durable.
PLEASE BE CAREFUL
Gun powder: Yes you could remove a bullet from a cartridge with a pair of pliers and
use some of the powder inside to catch your spark, but it is a violent reaction so if you are desperate enough to try this,
. (All the usual safety precautions apply. For example, never grasp a rimfire cartridge by its rim, with pliers!)
Don’t get me wrong, a fire is not difficult. For those who
wish to be proficient at it though does require some practice. But when you are cold, hungry, and out in the middle
of nowhere, a fire can save your life. Just remember to think about what kind of fire you really need.
Keep your powder (and your tinder) dry. - Brad M.